Sign up

[rmckinjr]

So when I bought this wideband setup I didn't get a gauge with it, thinking I could buy one later.....WRONG.  Anyway here's the set up for the AEM Inline Wideband UEGO Controller 30-2310.  

Connections on the SYL-1813 are: +12V on #1, GND on 2 then jumpered to #6, AEM UEGO White Wire on #9, AEM Brown Wire on #6.  Ofcourse the AEM Wideband needs to be connected to it's own 12V on Red wire and GND on Black wire.  It's simular to the Innovate LC-1 Wideband except for the jumper from #2 to #6 (Grounding the AEM UEGO Ground).  

The Set Up parameters are the same as the Innovate LC-1 Wideband AFR except the PuL = 7.31 and PuH = 19.19.

[admin]

Thanks for your post, rmckinjr. Really appreciate for providing such good information to our community.

[rmckinjr]

Here's a better version of the write up since I can't edit my first post.
http://matrixowners.com/index.php?/topi ... u-a-gauge/

You all need to make a adapter to a common round Automotive gauge.  Or re-engineer it as a round gauge