Sign up

[Iroshana]

I've installed SYL-1813 with P210 Pressure sender and it worked fine for about 10 days. But since yesterday the display shows only -018 and no response to the oil pressure. But suddenly sometimes it again shows correct values for about 10 - 15 minutes and again go back to -018 value. Any idea to correct this issue?

[colnny]

Probably it was caused by the sensor connections to the gauge. Please double check the connections to make sure they are secure. If you have a multimeter, you can try to measure the voltage between the terminals 6 and 10. It should be 5V DC. The voltage between the terminals 6 and 9 should be 0-5V. If it is always 0V, something is wrong with the sensor.